Front Seat Belt

NOTE: Check the front seat belts for damage, and replace them if necessary. Be careful not to damage them during removal and installation.

Front seat belt
1. Slide the front seat forward fully.
2. Remove these items:
- Rear seat-backs
- Rear seat cushion

3. Remove these items:
- Rear bulkhead cover
- Rear side trim panel

4. Remove the side trim:

Front Seat Belt - Coupe:

5. Remove the middle cross-member gusset (A)
-1 Detach the clips, and pull back the carpet (B).
-2 Remove the bolts (C, D) and nut, then remove the gusset.

Front Seat Belt - Coupe:

6. Remove the upper anchor cap (A) and lower anchor cap (B).

Front Seat Belt - Coupe:

7. Remove the bolts, then remove the seat belt guide (A)

Front Seat Belt - Coupe:

8. Remove the upper anchor bolt (A) and lower anchor bolt (B), the retractor mounting bolt (C), and the retractor bolt (D). Remove the front seat belt (E) and retractor (F).

Upper Anchor Bolt - Coupe:

Lower Anchor Bolt - Coupe:

Retractor Bolt - Coupe:

9. Install the reverse order of removal, and note these items:
- Check that the retractor locking mechanism functions.
- Assemble the washers, collar and bushing on the upper and lower anchor bolts as shown.
- Before installing the anchor bolts, make sure there are no twists or kinks in the front seat belt.