Throttle Valve Cable/Linkage: Testing and Inspection

NOTE: Before inspecting the throttle control cable, make sure that:
- Throttle cable free play is correct.
- Idle speed is correct.
- You warm up the engine to normal operating temperature (the radiator fan comes on).





1. Check that the throttle control cable is routed correctly and held in place by the three clamps.
2. Check that the throttle control lever is synchronized with the throttle linkage, while depressing and releasing the accelerator pedal.





3. If the throttle control lever is not synchronized with the throttle linkage, adjust the throttle control cable.





4. Check that there is play in the throttle control lever while depressing the accelerator pedal to the fully-throttle position.
5. Remove the cable end of the throttle control cable from the throttle control lever.





6. Check that the throttle control lever moves smoothly.