Bearing Replacement

TOOL REQUIRED
- 07736-A01000A Adjustable Bearing puller, 25-40 mm
- 07749-0010000 Driver
- 07746-0010500 Attachment, 62x68 mm
- Or Equivalent

NOTE: Coat all parts with ATF during installation.





1. Remove the snap ring from the torque converter housing.





2. Remove the mainshaft bearing and oil seal using the special tools as shown





3. Drive in the new mainshaft bearing until it bottoms in the housing using the special tools as shown.





4. Install the new oil seal flush with the snap ring groove in the housing using the special tools as shown.
5. Install the snap ring in the groove of the housing.