Rear Door Handle: Service and Repair

NOTE: Raise the glass fully.

1. Remove:
- Door panel
- Plastic cover




2. Remove the screws.




3. Move the latch down, and remove the bolts.




4. Pull out the outer handle. Pry the outer handle rod out of its joint using diagonal cutters.

NOTE:
- To ease reassembly, note location (A) of the outer handle rod on the joint before disconnecting it.
- Take care not to bend the outer handle rod.
- Use a shop towel to protect the opening in the door

5. Installation is the reverse of the removal procedure.

NOTE: Make sure the door locks and opens properly.