Rear Seat

CAUTION: Put on gloves to protect your hands.

NOTE: Take care not to tear the seams or damage the seat covers.

Seat-back cover removal:

2D/4D:
1. Remove the seat-back.




2. Loosen the seat-back cover by releasing all the clips.




3. Pull back the edge of the seat-back cover all the way around, then release the clips.
4. Installation is the reverse of the removal procedure.

NOTE:
- To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips.
- Replace the released clips with new ones.

3D:
1. Remove the seat-back.




2. Loosen the seat-back cover by releasing all the clips.

NOTE: Remove the lock knob, lock collar and latch cover.




3. Pull back the edge of the seat-back cover all the way around, then release the clips.
4. Installation is the reverse of the removal procedure.

NOTE:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the clips.
- Replace the released clips with new ones.

Seat side bolster cover removal (4D):

1. Remove the seat side bolster.




2. Loosen the seat side bolster cover by releasing all the clips, then remove it.
3. Installation is the reverse of the removal procedure.

NOTE:
- To prevent wrinkles when installing a seat side bolster cover, make sure the material is stretched evenly over the pad before securing the clips.
- Replace the released clips with new ones.

Seat cushion cover removal:

1. Remove the seat cushion.

4 Door:

2 Door/3 Door:

2. Loosen the seat cushion cover by releasing all the clips.




3. Pull back the edge of the seat cushion cover all the way around, release the clips, and remove the seat cushion cover.




4. Installation is the reverse of the removal procedure.

NOTE:
- To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips.
- Replace the released clips with new ones.