Installation

INSTALLATION





1. Before installing the steering wheel, center the cable reel. Do this by first rotating the cable reel clockwise until it stops. Then rotate it counterclockwise approximately two turns. The arrow mark on the cable reel label should points straight up.





2. Install the steering wheel with the steering wheel nut.

NOTE: Be sure the steering wheel shaft engages the cable reel and canceling sleeve.

3. Attach the cruise control switches connector to the steering wheel clip.
4. Connect the horn connector.
5. Install the driver's airbag assembly, and confirm proper system operation.
6. Check the horn and cruise control switches for proper operations.