Headliner: Service and Repair

CAUTION: When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

NOTE:
- Take care not to bend and scratch the headliner.
- Be careful not to damage the dashboard and other interior trim.

1. Remove:

4D:
- Front pillar trim (both sides)
- Center pillar lower trim panel (both sides)
- Upper anchor bolt from the front seat belt (both sides)
- Center pillar outer trim and center pillar upper trim
- Ceiling light
- Rearview mirror

3D:
- Front pillar trim (both sides)
- Right rear seat-back and rear seat cushion
- Rear center shelf
- Rear side shelf and side trim panel (right side)
- Upper anchor bolts from the front and rear seat belts (right side)
- Quarter trim panel (right side)
- Ceiling light
- Rearview mirror

2D:
- Front pillar trim (both sides)
- Right rear seat-back and rear seat cushion
- Side trim panel (right side)
- Upper anchor bolt from the front seat belt (right side)
- Quarter trim panel (right side)
- Ceiling light
- Rearview mirror




2. Remove the sunvisor and holder from each side.




3. Remove the grab handles and coat hanger.

2 Door/3 Door/4 Door:

3 Door:

2 Door:

4. Remove the rear roof trim and clips, and remove the roof trim and socket plug (moonroof model).
5. 4D: Lower the rear pillar trim on both sides.
3D: Remove the upper anchor bolts from the front and rear seat belts, then lower the quarter trim panel on left side.
2D: Remove the upper anchor bolt from the front seat belt, then lower the quarter trim panel on left side.
6. Lower the headliner.
7. Carefully remove the headliner through the passenger's door opening (2D/4D) or hatch opening (3D).
8. Installation is the reverse of the removal procedure.

NOTE:
- When inserting the headliner through the opening, be careful not to fold or bend it. Also, be careful not to scratch the body.
- Check that both sides of the headliner are securely attached to the trim.
- When installing the roof trim, install the joint toward the right side (moonroof model).