Clutch Master Cylinder: Service and Repair

REPLACEMENT

CAUTION:
- Avoid spilling brake fluid on painted surfaces, as it may damage the finish.
- Plug the end of the clutch pipe and reservoir hose with a shop towel to prevent fluid from flowing out of the clutch pipe and reservoir hose after disconnecting.

1. The brake fluid can be removed from the clutch master cylinder reservoir with a syringe.





2. Disconnect the clutch pipe and reservoir hose from the clutch master cylinder.





3. Pry out the cotter pin, and pull the pedal pin out of the yoke. Remove the nuts.





4. Remove the clutch master cylinder.
5. Install the clutch master cylinder in the reverse order of removal.

NOTE: Bleed the clutch hydraulic system.