Fuel Door Release Cable: Service and Repair

Fuel Fill Door Opener Cable Replacement

NOTE:
- Put on gloves to protect your hands.
- Take care not to scratch the body and related parts.
- Take care not to kink the cable.

1. Remove these items:
- Middle floor panel
- Right trunk side bulkhead
- Carpet, as necessary




2. Disconnect the fuel fill door opener cable (A) from the fuel fill door opener (B), and remove the fuel fill door latch (C) from the body by turning it 90°.
3. Using a clip remover, detach the clips (D, E) and remove the cable cushion (F) from the body, then remove the fuel fill door opener cable. Take care not to kink the cable.
4. Install the cable in the reverse order of removal, and replace any damaged clips and cable cushions