P1108

DTC P1108: BARO Sensor Circuit High Voltage

NOTE: Information marked with an asterisk (*) applies to '04 model.

1. Reset the ECM.
2. Turn the ignition switch ON (II).

Is DTC P1107 (P2228)* or P1108 (P2229)* indicated?

YES - Update the ECM if it does not have the latest software, or substitute a known-good ECM, then recheck. If the symptom/indication goes away with a known-good ECM, replace the original ECM.

NO - Intermittent failure, system is OK at this time.