Fuel Door Release Actuator: Service and Repair

Fuel Fill Door Opener Replacement




1. Using a flat-tip screwdriver wrapped with protective tape, detach the hooks (A) by prying the front side cap (B), then remove it from the left door sill trim (C), and loosen the bolt (D) securing the fuel fill door opener.
2. Remove the left door sill trim.




3. Remove the opener (A) from the bolt (B).




4. Disconnect the fuel fill door opener cable (A), then remove the opener (B). Take care not to bend the cable.
5. Install the opener in the reverse order of removal, and note these items.
- Make sure the opener cable is connected properly.
- Make sure the fuel fill door opens properly and locks securely.