Starting the Self-Diagnostic Function (Without Navigation)

Starting the self-diagnostic function (without Navigation)

1. Turn the ignition switch to ACC (I) or ON (II).
2. Turn the audio unit ON.
3. While holding down both the "Preset 1" and "Preset 6" buttons simultaneously, press the AUDIO PWR knob.




4. "DIAG" will appear on the audio unit display to indicate you have entered the self-diagnostic mode.
5. By pressing a button while "DIAG" is displayed, the input will trigger a mode that is assigned to that button.

Preset 3 button
Entire LCD lighting mode: Turns on the entire LCD to show the presence or absence of an LCD failure.

Preset 4 button
Entire LCD lights-out mode: Turns off the entire LCD to show the presence or absence of an LCD failure.

6. The self-diagnostic function will end when the audio unit is turned off, or the ignition switch is turned off.




Display Specifications