Rear Bumper: Service and Repair

Rear Bumper Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014

NOTE.
- Have an assistant help you when removing and installing the rear bumper.
- Take care not to scratch the rear bumper and body.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Put on gloves to protect your hands.

1. Remove the rear bumper as shown.




2. Install the bumper in the reverse order of removal, and note these items:
- Make sure both rear side marker light connectors are plugged in properly.
- Make sure the rear bumper engages the hooks of the side spacers, side brackets, and upper brackets on both sides securely.
- Make sure the upper spacers of the rear bumper engage the clips on the body securely.
- Replace any damaged clips.
- Push the clips into place securely.