Cowl Moulding / Trim: Service and Repair

Cowl Cover Replacement

1. Remove the windshield wiper arms.
2. Remove the windshield side trim from both sides.




3. Pull the hood rear seal (A) away from the cowl covers, then remove it, and using a clip remover, detach the clips (B) from the cowl covers. Take care not to scratch the cowl covers.
4. Detach the clips (C, D, E) by carefully pulling the passenger's cowl cover (F) upward, to release the hooks (G), and pull the cover forward to release the hooks (H), then remove the cover. Take care not to scratch the body.
5. Detach the clips (C, D, E) by carefully pulling the driver's cowl cover (I) upward, then pull the cover forward to release the hooks (J), and remove the cover. Take care not to scratch the body.
6. Install the covers in the reverse order of removal, and note these items:
- Replace any damaged clips.
- Push the clips into place securely.