Body Emblem: Service and Repair

Emblem Replacement

NOTE: When removing an emblem, take care not to scratch the body. Use dental floss to cut the adhesive safely.

1. To remove the front "H" emblem and front type emblem, remove the front bumper.
2. Clean the bonding surface with a sponge dampened in alcohol. After cleaning, keep oil, grease, and water from getting on the surface.







3. Apply the emblems as shown.
- When install in the side i-VTEC emblem on the body, align the application tape with the edge of the wheel arch, then press the emblem into place, and remove the application tape.
- For '03-05 models: When installing the LEV emblem on the quarter glass, align the application tape with the edge of the black ceramic and alignment mark on the quarter glass, then press the emblem into place, and remove the application tape.

4. After installing the front "H" emblem and front type emblem, reinstall the front bumper.