Child Seat Tether Attachment: Service and Repair

Child Seat Tether Anchor Removal/Installation

Middle




1. Remove the child seat tether anchor cover (A) in the rear trim panel (B).
2. Remove the anchor bolt (C), then remove the child seat tether anchor (D). Do not remove the toothed washer (E) from the tether anchor.
3. Install the anchor in the reverse order of removal, and apply liquid thread lock to the anchor bolt.

Side

1. Remove the rear bulkhead covers from both sides.




2. Remove the anchor bolt (A), then remove the child seat tether anchor (B) from behind the seat-back on each side of the cargo compartment. Do not remove the toothed washer (C) from the tether anchor.
3. Install the anchors in the reverse order of removal, and apply liquid thread lock to the anchor bolts.