Oil Pan Installation

Oil Pan Installation
1. Clean and dry the oil pan mating surfaces.





2. Apply liquid gasket P/N 08718-0002 to the engine block mating surface of the oil pan.

NOTE: Do not install the parts if 4 minutes or more have elapsed since applying liquid gasket. Instead, reapply liquid gasket after removing the old residue.





3. Install the new oil pan gaskets (A) and a new O-ring (B) on the oil pan, then install the oil pan (C). Tighten the transmission housing mounting bolts (D).





4. Tighten the bolts and nuts to the specified torque.
5. 2000-2003 models: Install the engine oil cooler bypass hose.
6. With A/C model: Install the A/C compressor.
7. With A/C model: Install and adjust the water pump A/C compressor belt.
8. Refill the engine with engine oil.
9. Install the splash shields.