Diesel Data: Automotive Repair
Home >> Honda >> 2005 >> Insight L3-1.0L Hybrid >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Actuators and Solenoids - Transmission and Drivetrain >> Actuators and Solenoids - CVT >> Pressure Regulating Solenoid >> Service and Repair >> CVT Drive Pulley Pressure Control Valve Replacement

CVT Drive Pulley Pressure Control Valve Replacement

CVT Drive Pulley Pressure Control Valve Replacement
2004-2005 Models
1. Remove the lower valve body.





2. Remove the solenoid harness clamp (A).
3. Disconnect the CVT drive pulley pressure control valve connector (B).
4. Remove the seven bolts, and remove the CVT drive pulley pressure control valve (C). The CVT start clutch pressure control valve (D) also be removed, it uses those four bolts.
5. Check that the filter (E) is in good condition, replace it if it is clogged or damaged.
6. Install the new CVT drive pulley pressure control valve with the dowel pins fully and separator plate (G), and CVT start clutch pressure control valve with the dowel pins and separator plate (I) on the lower valve body (J).
7. Connect the CVT drive pulley pressure control valve connector.
8. Install the solenoid harness clamp.
9. Install the lower valve body.


Diesel-Data.com