CVT Start Clutch Pressure Control Valve Replacement

CVT Start Clutch Pressure Control Valve Replacement
2004-2005 Models
1. Remove the lower valve body.





2. Disconnect the CVT start clutch pressure control valve connector (A).
3. Remove the CVT start clutch pressure control valve (B).
4. Check that the filter (C) is in good condition, replace it if it is clogged or damaged.
5. Install the new CVT start clutch pressure control valve with the dowel pins (D) and separator plate (E) on the lower valve body fully
6. Connect the CVT start clutch pressure control valve connector.
7. Install the lower valve body.