Harmonic Balancer - Crankshaft Pulley: Service and Repair

Crankshaft Pulley Removal and Installation

Special Tools Required
^ Socket, 19 mm 07JAA-001020A or a commercially available 19 mm socket
^ Holder handle 07JAB-001020B
^ Holder attachment, 50 mm 07NAB-001040A

Removal





1. Hold the pulley with holder handle (A) and holder attachment (B).
2. Remove the bolt with a heavy duty 19 mm socket (C) and breaker bar.

Installation





1. Clean the bolt (A), washer (B) pulley (C), and crankshaft (D). Lubricate with new engine oil as shown.





2. Install the crankshaft pulley, and tighten the bolt to 245 Nm (25.0 kgf-m, 181 ft. lbs.). Do not use an impact wrench.
^ 1 Hold the Pulley with the holder handle (A) and holder attachment (B).
^ 2 Tighten the bolt with a torque wrench and heavy duty 19 mm socket (C).