Front Passenger's Weight Sensor Replacement

Front Passenger's Weight Sensor Replacement

Removal ('04-06 models)

NOTE: Removal of the front passenger's weight sensors must be performed according to the precautions/procedures described at the beginning of SRS.

1. Remove the front passenger's seat assembly.
2. Remove the tamper-resistant Torx bolts attaching the seat to the weight sensors.
- 2-door
- 4-door

3. Remove the front passenger's weight sensors from the seat riser.
- 2-door
- 4-door

Installation ('04-06 models)

NOTE: Be sure to install the harness wires so they are not pinched or interfering with other parts.

1. Place the new front passenger's weight sensors on the front passenger's seat riser.
- 2-door
- 4-door

2. Install the seat onto the weight sensors.
3. Reinstall the front passenger's seat assembly.
4. Reconnect the battery negative cable.
5. Calibrate the front passenger's weight sensor unit ('03-05 models) ODS unit ('06 model).
6. After installing the front passenger's weight sensors, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for about 6 seconds and then go off.