Transmission

DTC P0369: Camshaft Position (CMP) Sensor B Intermittent Interruption

NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review General Troubleshooting Information.

1. Clear the DTC with the HDS.
2. Start the engine, and run it idle for 10 seconds.
3. Check whether the DTC P0369 is indicated in the DTCs/Freeze Data in PGM-FI Mode Menu with the HDS.
Is DTC P0369 indicated in the PGM-FI system?
YES - Troubleshoot for DTC P0369 in the PGM-FI System.
NO - Go to step 4.

4. Check whether the DTC P0369 is indicated in the DTCs/Freeze Data in A/T Mode Menu with the HDS.
Is DTC P0369 indicated?
YES - Update the PCM if it does not have the latest software, or substitute a known-good PCM, then recheck. If the symptom/indication goes away with a known-good PCM, replace the original PCM.
NO - Intermittent failure, the system is OK at this time.