Skid Plate: Service and Repair

Middle Floor Undercover Replacement

For Some Models

NOTE: Take care not to scratch the body.

1. Remove the bolts (A), and detach the clips (B), then remove the left middle floor under cover (C) and right middle under cover (D).

NOTE: To remove the clips B, pry the inner clip up at the edge near the line (E) on its head.




2. Install the under cover in the reverse order of removal, and note these items:
- Check for damaged or stress-whitened clips, and if necessary, replace them with new ones.
- Push the clips into place securely.