Starter Solenoid: Testing and Inspection
Starter Solenoid TestM/T
1. Remove the starter.
2. Remove the motor cable (A).
3. Check the hold-in coil for continuity between the S terminal and the armature housing (ground) (B). There should be continuity.
- If there is continuity, go to step 4.
- If there is no continuity, replace the solenoid.
4. Check the pull-in coil for continuity between the S terminal and the M terminal. There should be continuity.
- If there is continuity, the solenoid is OK
- If there is no continuity, replace the solenoid.
5. Install the motor cable.
6. Install the starter.