Headliner: Service and Repair

Headliner Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program

NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to bend and scratch the headliner.
- Be careful not to damage the dashboard or other interior pieces.
- Use a clip remover to remove the roof side pad clips.

1. Remove these items:
- A-pillar trim, both sides
- Spotlight
- Door weatherstrip, both sides as necessary
- Seat belt upper anchor, both sides
- Hatch support strut, both sides
- Quarter trim panel, roof portion as necessary

2. Remove the headliner as shown.




3. Install the headliner in the reverse order of removal, and note these items:
- Check for damaged or stress-whitened clips, and replace them with new ones.
- When reinstalling the headliner through the hatch opening, be careful not to fold or bend it. Also, be careful not to scratch the body.
- Check that both sides of the headliner are securely attached to the trim panel.