Diesel Data: Automotive Repair
Home >> Honda >> 2006 >> S2000 L4-2.2L >> Repair and Diagnosis >> Restraints and Safety Systems >> Service Precautions >> Vehicle Damage Warnings >> Spring-loaded Lock Connector

Spring-loaded Lock Connector

Spring-loaded Lock Connector ('06 Model)

Some SRS system connectors have a spring-loaded lock.




Disconnecting
To release the lock, pull the spring-loaded sleeve (A) toward the stop (B) while holding the opposite half of the connector. Then pull the connector halves apart. Be sure to pull on the sleeve and not on the connector.




Connecting
To reconnect, hold the pawl-side connector, and press on the back of the sleeve-side connector in the direction shown. As the two connector halves are pressed together, the sleeve (A) is pushed back by the pawl (C). Do not touch the sleeve.

Spring-loaded Lock Connector ('06 Model)




Disconnecting
To release the lock, pull the spring-loaded sleeve (A) toward the stop (B) while holding the opposite half of the connector. Then pull the connector halves apart. Be sure to pull on the sleeve and not on the connector half.




Connecting
Hold both connector halves, and press them firmly together until the projection (C) of the sleeve-side connector clicks.
Diesel-Data.com