A/T Clutch Pressure Control Solenoid Valve C Test
A/T Clutch Pressure Control Solenoid Valve C Test1. Connect the HDS to the DLC (A).
2. Choose Clutch Pressure Control (Linear) Solenoid C in Miscellaneous Test Menu on the HDS.
NOTE: If the HDS does not communicate with the PCM, troubleshoot the DLC circuit.
3. Test A/T clutch pressure control solenoid valve C with the HDS.
^ If the valve tests OK, the test is complete. Disconnect the HDS.
^ If the valve does not test OK, follow the instructions on the HDS.
^ If the valve does not test OK, and the HDS does not determine the cause, go to step 4.
4. Remove the air cleaner assembly and the air intake duct.
5. Remove the mounting bolts securing the harness cover (A), and remove the harness clamp (B).
6. Disconnect A/T clutch pressure control solenoid valve C connector (A).
7. Measure the A/T clutch pressure control solenoid valve C resistance at the connector terminals.
Standard: 3 - 10 ohms
^ If the resistance is out of standard, replace A/T clutch pressure control solenoid valve C.
^ If the resistance is within the standard, go to step 8.