Steering Wheel Downshift (-) Switch Replacement

Steering Wheel Downshift (-) Switch Replacement
SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before doing repairs or service.

1. Remove the steering wheel.
2. Remove the screws (A) (4) securing the steering wheel back cover (B) and the steering wheel front left cover (C), then remove the steering wheel back cover.





3. Remove the steering wheel downshift (-) switch connector from its holder, and disconnect the connector.
4. Remove the screw (D) securing the steering wheel downshift (-) switch (E), then remove the switch.
5. Replace the steering wheel downshift (-) switch.
6. Install the steering wheel front left cover and new steering wheel downshift (-) switch with the screw, and install the steering wheel back cover with the screws (4).
7. Install the steering wheel.