Steering Wheel Upshift (+) Switch Replacement

Steering Wheel Upshift (+) Switch Replacement
SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before doing repairs or service.

1. Remove the steering wheel.
2. Remove the screws (A) (4) securing the steering wheel back cover (B), then remove the steering wheel back cover.





3. Remove the steering wheel upshift (+) switch connector from its holder, and disconnect the connector.
4. Remove the screw (C) securing the steering wheel upshift (+) switch (D), then remove the switch.
5. Replace the steering wheel upshift (+) switch with a new one.
6. Install the cruise control combination switch and new steering wheel upshift (+) switch with the screw, and install the steering wheel back cover with the screws (4).
7. Install the steering wheel.