Alarm Module: Service and Repair

Immobilizer Control Unit-Receiver Replacement

'06-07 models

1. Remove the steering column covers.




2. Disconnect the 7P connector (A) from the immobilizer control unit-receiver (B).
3. Disconnect the 7P connector (C) from the ignition key switch.
4. Remove the four screws, and remove the immobilizer control unit-receiver from the ignition key cylinder.
5. Install in the reverse order of removal.
6. Register the immobilizer control unit-receiver with the HDS.

NOTE: The ECM code and all of the customer's keys are required.

7. After replacement, make sure the immobilizer indicator blinks correctly.