Removable Hardtop Trim

Interior Trim Removal/Installation

Special Tools Required
- KTC trim tool set SOJATP2014*
* Available through the American Honda Tool and Equipment Program; call 888-424-6857

NOTE:
- Put on gloves to protect your hands.
- To remove and install the interior trim, remove the roof from the body.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Use a clip remover to remove the rear window lower trim clips.
- Take care not to bend or scratch the interior trim.

1. Remove the trim as shown.




2. Install the trim in the reverse order of removal, and note these items:
- Replace the damaged adhesive tape, and check for damaged or stress-whitened clips, and replace them with new ones.
- Push the clips into place securely.
- Before peeling away the adhesive backing from the adhesive tape on the end cap, install the roof side trim on the roof tentatively to check the position of the trim end.
- When installing the roof side trim, first install the front end, and insert the lower end into the end cap, then push the corner portion against the roof securely. Make sure there is no clearance between the trim and cap.