Seat Cover: Service and Repair

Seat Cover Replacement

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.

NOTE:
- Take care not to tear the seams or damage the seat covers.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Put on gloves to protect your hands.

Seat-back Cover '00-05 Models
1. Remove the seat-back cover in numbered sequence.
2. Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the clips, Velcro fasteners and hooks.
- Replace the released clips with new ones using commercially available upholstery pliers.
- Replace any damaged head restraint cover clips.









Seat-back Cover '06-08 Models
1. Remove the seat-back cover in numbered sequence.
2. Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the clips, Velcro fasteners and hooks.
- Replace the released clips with new ones using commercially available upholstery pliers.









Seat Cushion Cover
1. Remove the seat.
2. Remove the seat cushion, driver's.
3. Remove the seat cushion cover in numbered sequence.
4. Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips.
- Replace the released clips with new ones using commercially available upholstery ring pliers.