Clearing Diagnostic Trouble Codes

How to Clear DTCs

NOTE: You cannot clear the DTCs manually.





1. With the ignition switch OFF, connect the HDS to the 16P data link connector (DLC) (A) under the driver's side of the dashboard.
2. Turn the ignition switch ON (II).
3. Make sure the HDS communicates with the vehicle and the VSA modulator-control unit. If it doesn't, troubleshoot the DLC circuit.
4. Clear the DTC(s) by following the screen prompts on the HDS.

NOTE: Seethe HDS Help menu for specific instructions.

5. If the VSA activation indicator remains on, but the VSA and ABS indicators are OFF, do the VSA sensor neutral position memorization.
6. Turn the ignition switch OFF.