8. Countershaft Disassembly

Countershaft Disassembly





1. Remove the needle bearing.





2. Remove the inner race (A) using a commercially available bearing separator and a press as shown.





3. Raise the 27 mm locknut tab from the groove in the countershaft.





4. Securely clamp 4th and 5th gears in a bench vise with wood blocks (A).
5. Remove the 27 mm locknut (B) and the spring washer (C).





6. Remove the ball bearing using a press as shown.
7. Remove the remaining parts from the countershaft.