2nd Clutch Transmission Fluid Pressure Switch, Replacement

2nd Clutch Transmission Fluid Pressure Switch, Replacement

1. Remove the air cleaner assembly and the intake air duct.
2. Remove the harness clamp (A) from its bracket, and remove the air cleaner housing bracket (B).





3. Disconnect the 2nd clutch transmission fluid pressure switch connector, and remove the 2nd clutch transmission fluid pressure switch (A).





4. Make sure there is no water, oil, dust, or foreign particles inside the connectors.
5. Install a new 2nd clutch transmission fluid pressure switch with a new sealing washer (B), and tighten the switch to the specified torque by turning the metal part, not the plastic part.
6. Connect the connector securely.
7. Install the air cleaner housing bracket, and install the harness clamp on its bracket.
8. Install the intake air duct and the air cleaner assembly.