Change Lever Assembly Disassembly/Reassembly

Change Lever Assembly Disassembly/Reassembly

Change Lever Assembly:

Special Tools Required
^ Attachment, 24 x 26 mm 07746-0010700
^ Driver 07749-0010000

1. Remove the breather cap (A), detent bolt (B), washer (C), spring (D), and steel ball (E). Remove the detent bolt (F).





2. Remove the special bolt (A) and spring washer (B).





3. Remove the change lever (C) and shift arm (D) from the shift arm cover (E).
4. Remove the oil seal (F).
5. Remove the spring pin (A) from the select lever (B).





6. Remove the select lever from the shift arm cover (C), then remove the shift piece (D) and the interlock (E).
7. Remove the oil seal (F).
8. Remove the reverse lock cam (A).





9. Install in the reverse order of removal.