Paddle Shifter + (Upshift Switch) Test

Paddle Shifter + (Upshift Switch) Test

SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before doing repairs or service.
1. Remove the steering wheel.
2. Check the paddle shifter + (upshift switch) for continuity between cable reel subharness 13P connector terminals No. 6 and No. 9.
There should be continuity while pressing the paddle shifter +, and no continuity when the paddle shifter + is released.





3. The paddle shifter + test is finished if the test result is OK.
If the paddle shifter + fails the test at the 13P connector, test the paddle shifter + at the paddle shifter + connector.
4. Remove paddle shifter + connector from its holder, and disconnect the connector.





5. Check the paddle shifter + for continuity between the paddle shifter + connector terminals while pressing the paddle shifter + and when the paddle shifter + is released.
There should be continuity while pressing the paddle shifter +, and no continuity when the paddle shifter + is released.
6. Replace the paddle shifter + if the paddle shifter + works incorrectly.
7. Replace the cable reel subharness if the paddle shifter + is OK.