Rear Console Removal/Installation

Rear Console Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.

NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the front seat and related parts.

1. Remove these items:
- Center console
- Rear tray (except CR model)
- Rear cover (CR model)
- Roll bar lower trim, both sides

2. Remove the rear console as shown.
3. Install the rear console in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Make sure the connectors are plugged in properly.
- Push the clips into place securely.