Diesel Data: Automotive Repair
Home >> Honda >> 2008 >> S2000 L4-2.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Head Assembly >> Valve Cover >> Service and Repair >> Cylinder Head Cover Removal

Cylinder Head Cover Removal

Cylinder Head Cover Removal

1. '00 - 05 models: Disconnect the camshaft position (CMP) sensor A (top dead center (TDC) sensor 1) connector and CMP sensor B (TDC sensor 2) connector.





2. '06 - 08 models: Disconnect the camshaft position (CMP) sensor connector.





3. Remove the dipstick (A), positive crankcase ventilation (PCV) hose (B), and breather hose (C).








4. Remove the harness clamps (A).





5. Remove the ignition coil.
6. Remove the cylinder head cover.




Diesel-Data.com