Driver's Dashboard Lower Cover Removal/ Installation

Driver's Dashboard Lower Cover Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.

'06-08 Models

NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard and related parts.

1. Remove the driver's dashboard lower cover (A).
1. Turn the lock knob (B) 90°.
2. Gently pull out on the bottom edge to release the clips (C, D).






2. Install the cover in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.