Tire Pressure Module: Service and Repair

TPMS Control Unit Replacement

NOTE: Make sure the TPMS control unit mounting bracket is not bent or twisted as this may affect its communication with the tire pressure sensors.

1. Turn the ignition switch to LOCK (0).
2. Remove the driver's dashboard lower cover.
3. Disconnect the TPMS control unit connector (A).





4. Remove the flange bolt (B), and remove the TPMS control unit (C) with the bracket (D).
5. Remove the TPMS control unit (A) from the bracket (B).





6. Install the TPMS control unit in the reverse order of removal.

NOTE: Make sure the TPMS control unit is properly installed. You will hear a click when the TPMS control unit is securely mounted on the bracket.

7. Connect the HDS, and memorize the tire pressure sensor IDs using the TPMS initializer tool.