Hood Weatherstrip: Service and Repair

Hood Seal and Hood Molding Replacement

1. Using a clip remover, detach the clips (A), then remove the hood seal (B). On Canada models: Detach the clips (C), then remove the hood molding (D). Take care not to scratch the hood.

2. Install the seal or the molding in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.

2-door - Except Canada models





2-door - Canada models





4-door - Except Canada models





4-door - Canada models