Power Mirror Replacement
Power Mirror Replacement
1. Lower the door glass fully.
2. With your hand, carefully pull the top edge of the door tweeter cover (A) out to detach the upper hooks (B) and the clip, and remove the cover by lifting it upward to release the bottom hooks (C). Disconnect the door tweeter connector (D).
3. Disconnect the connector (A).
4. While holding the mirror, remove the nuts securing the mirror.
5. While holding the mirror, squeeze the retaining tabs on the connector clip (A), then push out to remove the mirror (B). Take care not to scratch the door.
6. Install the mirror in the reverse order of removal, and note these items:
- Make sure the connector is plugged in properly.
- If the clip is damaged or stress-whitened, replace it with a new one.
- Push the clip and the upper hooks on the cover into place securely.