Rear Seat Cushion Cover Replacement

Rear Seat Cushion Cover Replacement

NOTE:

- Put on gloves to protect your hands.

- Take care not to tear the seams or damage the seat covers.

1. Remove the seat cushion. Rear Seat Removal/Installation

2. From the back of the seat-back, release all the upholstery rings (A), and fold back the seat cushion cover (B).

2-door





4-door





3. Pull back the edge of the seat cushion cover (A) all the way around, and release the upholstery rings (B), and release the hooks (C) of the horizontal wires (D) from the vertical wires (E) on the pad, then remove the seat cushion cover.
NOTE: The leather seat cover is shown; the other types of the seat cover are similar.

2-door





4-door





4. Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the upholstery rings.

- Replace all of the upholstery rings (A) fastening the seat-back cover (B) and pad wire (C) with new ones using commercially available upholstery ring pliers (D).