Rear Door Window Glass Weatherstrip: Service and Repair

Rear Door Glass Outer Weatherstrip Replacement

4-door

NOTE:

- Put on gloves to protect your hands.

- Take care not to scratch the door.

1. Remove these items:
- Door panel Rear Door Panel Removal/Installation (4-Door)

- Plastic cover, as needed Service and Repair

2. Raise the glass fully.

3. Remove the screws from the front and rear edges of the door.






4. From the inside of the door, slide the clips (A) of the door glass outer weatherstrip (B) to release the hooks (C) from the flanges (D) of the door panel.






5. Pull up the door glass outer weatherstrip (A) while passing the front and rear edges of the weatherstrip over the door sash outer trim (B) and the door outer molding (C), then remove the weatherstrip.

6. If the clips are damaged or stress-whitened, replace them with new ones.

7. Before installing the door glass outer weatherstrip, align the clips of the weatherstrip to the flanges where the clips should be engaged by sliding them.

8. Push the clip portions of the rear door glass outer weatherstrip into place securely.