Set Speed Does Not Resume When the Resume/Accel Switch Is Pressed (Temporarily Canceled By Pressing Clutch Pedal)

Set speed does not resume when the resume/accel switch is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the clutch pedal) (M/T model)

Diagnostic Procedure:

1. Check for PGM-FI DTCs. Initial Inspection and Diagnostic Overview

2. Check the clutch pedal position switch adjustment. Adjustments

3. Do the cruise control combination switch test. Cruise Control Combination Switch Test/Replacement

4. Do the cruise control input test. Cruise Control Input Test Test the resume/accel switch signal input. Test the clutch pedal position switch signal input.

Also check for:

- Open circuit, loose or disconnected terminals: LT BLU, GRY wire
- Faulty clutch pedal position switch