Fan Shroud: Service and Repair

Fan, Fan Motor, and Shroud Removal and Installation

Removal

1. Do the battery removal procedure. Removal and Replacement

2. Remove the harness clamps, then remove the battery base. Engine Removal

3. Remove the front grille cover:
- 2-door Front Grille Cover Replacement (2-Door)

- 4-door Front Grille Cover Replacement (4-Door)

4. Remove the water separator (A) and the intake air duct (B).






5. Remove the coolant reservoir.






6. Disconnect the fan motor connectors (A), then remove the harness clamp (B).






7. Remove the A/C condenser fan shroud assembly (A), then remove the radiator fan shroud assembly (B).
NOTE: Move the radiator fan shroud assembly toward the right side of the vehicle to allow enough space to lift it up and away from the A/C condenser fan shroud assembly.






8. Disassemble the fan shrouds.






Installation

1. Reassemble the fan shrouds.






2. Install the radiator fan shroud assembly (A), then install the A/C condenser fan shroud assembly (B).






3. Connect the fan motor connectors (A), then install the harness clamp (B).






4. Install the coolant reservoir.






5. Install the water separator (A) and the intake air duct (B).

6. Install the front grille cover:
- 2-door Front Grille Cover Replacement (2-Door)

- 4-door Front Grille Cover Replacement (4-Door)

7. Install the battery base, then install the harness clamps. Engine Installation

8. Do the battery installation procedure. Removal and Replacement