A/T Shift Lock Stop, Shift Lock Stop Cushion Replacement

A/T Shift Lock Stop, Shift Lock Stop Cushion Replacement

Type A Shift Lever

1. Remove the shift lock solenoid. Service and Repair

2. Remove the shift lock stop (A) and the stop cushion as a set.

3. Apply silicone grease to the pin (B) on the shift lever bracket, and install the shift lock stop over the pin.
NOTE: Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you have silicone grease on your hands or gloves.

4. Install a new shift lock stop.

5. Install the shift lock solenoid. Testing and Inspection






Type B Shift Lever

1. Remove the shift lever assembly. Shift Lever Removal (A/T)

2. Release the lock tab (A) retaining the shift lock solenoid using a thin-bladed screwdriver.

3. Remove the shift lock stop (B) and the stop cushion as a set.

4. Apply silicone grease to the pin (C) on the shift lever bracket, and install the shift lock stop over the pin.
NOTE: Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you have silicone grease on your hands or gloves.

5. Install a new shift lock stop.

6. Install the shift lock solenoid by aligning the joint of the shift lock solenoid plunger with the tip of the shift lock stop, then push the shift lock solenoid into the shift lever securely.

7. Install the shift lever assembly. Shift Lever Installation (A/T)