Output Shaft (Countershaft) Speed Sensor Replacement (A/T)

A/T Output Shaft (Countershaft) Speed Sensor Replacement

1. Remove the nut securing the under-hood fuse/relay box, and swing it out of the way.

2. Remove the intake air duct and the air cleaner assembly.

3. Disconnect the output shaft (countershaft) speed sensor connector, and remove the output shaft (countershaft) speed sensor (A).

4. Install a new O-ring (B) on a new output shaft (countershaft) speed sensor with the speed sensor washer (C), then install the output shaft (countershaft) speed sensor in the transmission housing.

5. Check the connector for rust, dirt, or oil, and clean or repair if necessary, then connect the connector securely.

6. Install the intake air duct and the air cleaner assembly.

7. Install the under-hood fuse/relay box.