Rocker Arm Assembly Installation

Rocker Arm Assembly Installation

1. If the rocker arm assembly is disassembled, reassemble the rocker arm assembly. Rocker Arm and Shaft Disassembly/Reassembly

2. Install the oil control orifice (A) with a new O-ring (B), then install the rocker arm assembly (C).

3. Install the lost motion assembles (D) and the lost motion holder (E).






4. Tighten each bolts two turns at a time in sequence.





5. Adjust the valve clearance. Adjustments

6. Install the cylinder head cover. Cylinder Head Cover Installation